If you are combination boiler is not working anymore and it is not giving you hot water then it can be because of the boiler pressure. Sometimes the boiler pressure becomes too low or too much and then many people face this problem. This problem results in you not getting any hot water in the winter season and it can be a very big problem especially if you need to take a shower as early as possible.
It is not possible to survive without hot water in many different climates and that is why it is a huge problem and you need to get rid of it as early as possible you don’t need to worry because we are going to bring you our complete guide on how you can solve this problem on your own without having to worry about anything else.
When it is freezing outside the last thing you want is for your hot water to stop working. It is the worst thing that can ever happen to you because a cold shower is the worst thing when it is snowing outside and it is not even possible.
In this article, we are going to talk about how to avoid hot water problems from your combination boiler. So, keep on reading to find out more information below about Infinity hot water.
Troubleshooting The Hot Water Problem Step By Step
Pilot Light Problem
If you are combination boiler is not producing any hot water at the moment then it can be a pilot light problem and you should check it as early as possible. It is important for the pilot light to be illuminated and then it is going to give you what water. If the light is not burning then you should burn it and then you will start getting hot water from your combination boiler once again.
Frozen Pipe
Another problem can be a frozen Pipe and it can happen to the best of us. It is a very common problem, especially in the countries where the climate is very cold and the pipe can face during the winter season. When all the water is frozen like ice in the pipe then you are not going to get any hot water.
What you can do is slowly warm up the pipe by putting a warm cloth over it after dipping it in warm water. All you need to do is to defrost the pipe and then you will start getting hot water once again in your combination boiler.
Diverter Valve Failure
If there is a fault in the diverter then you will not get any hot water from your combination boiler and it can be a problem. It happens because the radiator of your combination boiler is not going to respond when you heated on. That is why you are not going to get any access to hot water in the first place when you want to take a shower or use hot water in any other room of your home. If you are a boiler then it is going to cost you money to get rid of the problem.
In most cases, this problem is going to require an expert. Get in touch with an expert or an engineer who is going to get rid of this issue and use the experience to give you hot water access once again in your home during the winter season.